A-Closer-Look-At: Sunscreens (part I)

Sunscreens – part one: How do sunscreens work?

The big question is of course, why should you use sunscreen. Sunscreen is good for preventing sunburn. The red color of sunburned skin is a tell-tale sign that skin cells are damaged. Damage can be induced by UVA (Ultra violet sub type A) and UVB (Ultra Violet sub type B). There is also UVC (Ultra Violet sub type C), but the ozone layer prevents UVC from entering the atmosphere. UVB increases melanin production in the skin, which makes us tan, and also causes sunburn.

UVA is perhaps even more dangerous. UVA is able to penetrate deeply into the skin, ages skin quickly and damages DNA. Damaged DNA can lead to cancer (okay, I have to admit, that the fact that ‘DNA damage causes cancer’ is a very, very brief summary about what causes cancer. Even now, scientists are still trying to figure out how and why cancer exists.)

UVA isn’t blocked by glass or the clouds. Unlike UVB, UVA doesn’t give you any warning signs. You’re not going to get a sunburn or a tan. UVA is present every day, in every season, whether it is overcast or not. My first advice would be  to wear sunscreen (with at least SPF 15) every day. My second advice is to wear a broad spectrum sunscreen which protects you for both UVB and UVA. You should be able to tell from the packaging if this is the case.l

Oh, and it is wise to avoid sunbeds, according to a study in 2007, even one visit to a sunbed can increase your chances of getting skincancer (melanoma, the most dangerous kind) by 19%! (International Agency for Research on Cancer Working Group on artificial ultraviolet (UV) light and skin cancer. The association of use of sunbeds with cutaneous malignant melanoma and other skin canacers: A systematic review. Int J Cancer. 2007: 120: 1116-1122.)

How do sunscreens work?
There are two types of sun filters; chemical and physical.
Chemical filters (oxybenzone, octyl methoxycinnamate, octocrylene and avobenzone) are absorbed into the skin and absorb UV radiation. A number of chemical filters can be absorbed by the body and end up in the bloodstream. Others can generate free radicals (free radicals are bad!) when they react with the suns rays and therefore cause skin damage. This also happens if you don’t use a sunscreen!

Physical sunfilters stay on the skin and reflect the light. Good examples are titanium oxide and zinc oxide. They create a barrier to protect the skin by not allowing harmful chemicals to enter the bloodstream. They are known to not cause irritation. A drawback is that physical sunscreens leave a white film on the skin. If these sunscreens don´t leave a white film, nanotechnology is used.

What is nanotechnology?
Nanotechnology is the use of very, very tiny particles to enhance the performance of a product. The name derives from a nanometer. A nanometer is one billionth of a metre. Nanotechnology is the study of manipulating material on a molecule or atom scale. It is a relatively new study, so long term health effects are not known yet. The main concern is whether or not the particles can be absorbed by the skin and other cells of the body. This could lead to a higher dosage of the chemical in your body. The dosage of a chemical is linked to its toxicity. How higher the dosage, the more dangerous (poisonous) a chemical is. The main concern is if nanotechnology can penetrate the skin and cells. If yes, it could be dangerous, if not, we don´t have to worry. Unfortunatley, this is still being researched, so I can´t give a clear statement whether or not nanotechnology is advisable or not.

What is SPF?
SPF, sun protection factor is a (laboratory) logaritmic measure of how effective a sunfilter is. This is mentioned on the bottle. The SPF is the amount of UV radiation required to cause sunburn on skin with the sunscreen on in comparisation of the amount UV radiation required without the sunscreen.

It is said that the number of SPF determines how long one can stay in the sun without re-applying the product. For instance, if you get a sunburn from one hour of exposure to the sun, you should be able to stay in the sun for 15 hours with an SPF 15 on. This is not true. The intensity of radiation varies considerably with time of day. In early morning and late afternoon, the radiation has to pass through more of the atmosphere because the sun is nearer the horizon. The amount of SPF is determined by factors like skin type, the amount of sunscreen that is applied and the frequency of re-application, activities (sports, swimming) and the amount of sunscreen the skin has absorbed.

It is therefore recommended to re-apply sunscreen (half a teaspoon every application for the face and a shotglass for the rest of the body) every two hours and to stay out of the sun during the hottest hours of the day (12.00 – 15.00) of the day. Or go and have a nice long lunch in the shade. Or take a siesta.I mean, it’s vacation anyway.

Make up has an odd number of SPF (for instance, SPF 8 or 18) because first, the product is formulated and then the SPF is measured. Usually, an SPF in make up, or in a sunscreen in spray form isn´t as effective as a  regular SPF because you have to apply the sunscreen thickly. With a spray, it is usually not easy to determine where, how thickly and evenly the sunscreen is applied. With make up it is the same way. To get the SPF that is indicated on a foundation or powder, you have to put on the foundation very thickly (a.k.a. cakey!). So it’s always better to use a sunscreen under your day cream and makeup.

SPF can’t be increased by layering it. I will explain this with an experiment. Take two glasses. Fill them with water. Add to each glass the same amount of food coloring (or dye), for instance, 3 drops. Mix well, and take half of the first glass. Put this in a new glass. Now take half of the other glass, and put it in the third glass as well. Has the color changed? No. So, if you use a daycream with SPF 15 and a foundation with SPF 15, you will not get SPF 30. It will only help you to reach the required half teaspoon of sunscreen.

As I said earlier, SPF is a logaritmic scale. This means that SPF stops 93% of the UV rays (UVA or B depending on the sunscreen). Factor 30 stops 97% of the radiation. A higher factor is not always better. The higher the SPF, the more greasy the product will feel like. If your skin type is average (meaning not extremely fair), I would recommend sticking with SPF 15 in the winter and SPF 30 in the summer.

A wee bit extra
Next to a good sunfilter, it is also wise to check the rest of the sunscreen. Are there irritating ingredients in the sunscreen, like perfume, PABA, coloring agents, methylisothiazolinone, tea tree oil, witch hazel, ylang ylang, mint or citrus? Alcohol is not good either, unless it is a fatty alcohol (just type in the name of the Alcohol in wikipedia, and scan the page on the word “fatty alcohol”. For instance, cetearyl alcohol is a fatty alcohol).

And last, but no means least, after tanning/staying in the sun and using a sunscreen, hydrate your skin! Take a luke warm shower or apply aloe vera to cool the skin. Or use after-sun.

In the next post about sunscreens, I will talk about different kinds of sunscreens, and which ones to look out for!

Until next time,
Dymphy

Advertisements

Read-the-Label: Embryolisse Cleansing Bar

Last Friday, I looked at triticum vulgare or wheat kernel oil, which is a component of the Embryolisse Cleansing Bar, and I was curious how the bar could be made without soap.

Let me first explain what soap is. Soap is the salt of a fatty acid and is a member of the surfactants family.
Soap is made by treating vegetable of animal oils and fats (which contain three tails) with a stong base (such as sodiumhydroxide).
The saponification (I’m not making this up) takes place by hydrolyzing and breaking up the oils into seperate tails and then mixed with the base. During this proces, glycerine is produced as a by-product. The reason soaps cleanse, is that they have a polar, water-loving head that can dissolves dirt that is water-soluble. They also have an a-polar oil-loving tail, that dissolves dirt that is soluble in oil. The reason why soap makes your skin feel dry is because while it’s cleansing, it will also wash away the natural oils (or sebum) on your skin.

So, I was quite interested in how the no-soap bar works and what the ingredients are.

Disodium lauryl sulfosuccinate, sodium coco sulfate, triticum vulgare, cetearyl alcohol, paraffin, aqua, parfum, titanium dioxide.

On first glance, I see a sulfate. I’m not sure whether or not a sulfate is considered soap. There is also some paraffin and cetearyl alcohol to moisturize the skin. There is some water added, but not much.

Disodium lauryl sulfosuccinate is a surfactant and it is a salt of a lauryl alcohol half ester of sulfosuccinic acid. So technically (as in, the chemical definition of soap), there is some soap in this cleansing bar. However, it’s emulsifying/cleansing properties are likely much less, so the skin doesn’t get stripped of all it’s sebum.

Sodium coco sulfate is a surfactant as well as the disodium lauryl sulfosuccinate. It is the less irritating version of Sodium Lauryl Sulfate. The difference of sodium coco sulfate and sodium lauryl sulfate is the degree of purification. Purified coconut oil makes sodium lauryl sulfate, unpurified coconut oil makes sodium coco sulfate. However, sodium coco sulfate doesn’t foam as well and will vary depending on the quality of the coconut crops harvested in a particular year.

So, is there soap in this bar? Well, there are no ‘traditional’ soap components, but there are some surfactants that could be classified as soap.

However, there are just two components that are classified as soap (and they do make up most of the product), but after that, the good stuff comes. For instance, Triticum Vulgare, or Wheat kernel oil, an oil with a lot of good fatty acids and vitamin E to moisturize the skin.

There is also Cetearyl alcohol, known as the “good alcohol”, one of the small group of alcohols that moisturize the skin instead of making it feel dry. It is derived from coconut oil or can be made synthetically. It is basically a mixture of fatty acid alcohols.

Paraffin is a bit of a underdog lately. It is actually an alkaline (get it? fatty acids + alkaline makes soap!) and could be used as a thickener. It won’t clog pores, because the formula will wash away during cleansing. Then there is Aqua, water; always good and Parfum. Parfum is in the formula to make the product smell nice.

Titanium Dioxide It is only used in a concentration of 1% or less, so we can safely assume that it is used to give the product it’s white color (and not to provide SPF, since it is used in a such a low concentration and will wash away during cleaning). (~could also be used as a thickening agent ~Monique) Oh, and lately I have heard that titanium dioxide is a natural compound and not a chemical. Please keep it in mind that every substance is a chemical, whether it would be water, plastic or titanium dioxide. So, a “chemical free” sunscreen claim is not correct.

So, from the ingredientlist I can conclude that there is actually soap in the no soap bar. However, the used ingredients provide for a less irritating formula than traditional soap and might be worth a try.

Until next time,

Dymphy

A-Closer-Look-At: Triticum Vulgare

I browsed through the Promakeupstore website and I clicked on the Embryolisse Cleansing Bar. First I thought that it was a soap bar, so I was curious whether or not the ingredients would be listed (contrary to regular cosmetics this isn’t obligatory for soap bars). Then, I actually discovered that the bar was soap free. So, I quickly scanned the ingredient lists, and saw Triticum Vulgare listed. The name made me curious, what is this ingredient?So, Triticum Vulgare, otherwise known as Wheat germ, Octacosanol, Octacosanol concentrate, Octa cosyl alcohol, Polycosanol, Isopolicosanol, Ateromixol is a grain.

In the Embryolisse Cleansing Bar, the oil is used. It is extracted from the kernel of the grain
It is a light yellow or reddish oil. The oil contains octacosanol and policosanol(long, saturateded alcohols which are good for the body) , the fatty acids linoleic acid (omega-6 and omega-3), palmitic acid, oleic acid and vitamin E. It is no surprise that the wheat kernel oil is used as a moisturizer. Scientist believe that it is the vitamin E that benefits the skin the most.
It is also used in the treatment of exzema, dry or irritated skin, wrinkled skin, scars and hair. However, it isn’t very wise to put pure wheat oil on your face. The oil has a drying effect on skin. If you do want to DIY with it, try an oil blend of a maximum of up to 10-15% of wheat kernel oil.
Is the oil all safe? No, people allergic to wheat or with Celiac’s disease (there is a difference between allergy and intolerance such as Celica disease) should avoid it.
Wheat kernel oil can also be taken as a supplement, but you should make sure that it doesn’t interfere with your medication. For instance, octacosanol may interfere with the Parkinson’s drug Levodopa. Policosanol may thin the blood slightly and thus should be avoided by people with potential bleeding disorders and who are taking blood-thinning drugs such as Asperin and Warfarin (Coumadin).
Until next time,
Dymphy

Read-the-label: Embryolisse Lait-Créme Concentree & Fluide

Today we are going to look at not one, but two products!
Embryolisse Lait-Creme Concentree and the Embryolisse Lait-Creme Fluide.

The two ingredient lists are:

Lait-Creme Concentree:
AQUA. PARAFFINUM LIQUIDUM. STEARIC ACID. GLYCERYL STEARATE. TRIETHANOLAMINE. CERA ALBA. CETYL PALMITATE. BUTYROSPERMUM PARKII. STEARETH-10. POLYACRYLAMIDE C13-14 ISOPARAFFIN, LAURETH-7. PROPYLENE GLYCOL, HYDROLYZED SOY PROTEIN, ALOE BARBADENSIS. 1,2-HEXANEDIOL, CAPRYLYL GLYCOL. TROPOLONE. PARFUM

And for the Lait-Creme Fluide:
AQUA. PARAFFINUM LIQUIDUM. STEARIC ACID. GLYCERYL STEARATE. TRIETHANOLAMINE. CERA ALBA. CETYL PALMITATE. BUTYROSPERMUM PARKII. STEARETH-10. POLYACRYLAMIDE C13-14 ISOPARAFFIN, LAURETH-7. PROPYLENE GLYCOL, HYDROLYZED SOY PROTEIN, ALOE BARBADENSIS. 1,2-HEXANEDIOL, CAPRYLYL GLYCOL,TROPOLONE. PARFUM

Smart people already have found out that the ingredient lists features the same ingredients, in the same order. But why is there a difference between the cream-like texture of the Lait-Creme Concentre, and the more runny, almost milk-like texture of Lait-Creme Fluide? The difference is the amount of solvent used. During the manufacturing proces, a products usually starts with a solvent or carrier. Most times this is something like water or an oil (blend). Other ingredients are mixed into this carrier, which literaly “carries” the formula. In the Lait-Creme Fluide, there is more solvent (water – aqua) then in the Lait-Creme Concentre. Think of it like concentrated Continue reading

Get the look: Eva Jinek

Event: book launch of Linda de Mol’s first photo book in 2011

A look I did for Eva Jinek, dutch tv anchor woman and talkshow host of (formerly) the NOS Network, and currently Vandaag de Dag and Eva Jinek op Zondag.

Eva, Bram and Linda de Mol together, showing the first copy of the book that Linda launched to celebrate her series of celebrity couples in Dutch magazine “Linda”. Eva and Bram received the first copy because their love affair actually began during their shoot and the interview they did for the interview.

How to achieve the look I gave Eva for this event:

Face prep:
Eva has lovely skin so only a touch of Embryolisse Lait-Créme Concentree on dry zones is sufficient. A touch of Elizabeth Arden’s 8-hour cream on the lips to moisturize and prevent flaky lips when it’s time to finish the look.

Foundation:
FACE Atelier Silicone Ultra Pro foundation in #2 Ivory along the t-zone and #3 Wheat on the outer perimeters of the face. This foundation does not require priming at all.
The new Super Foundation Brush by Royal & Langnickel applies this foundation beautifully. Buff it out with a dampned Beauty Blender for that lovely airbrushed finish.
Lightly powdered with Yaby loose powder.

Cheeks:
Nars blush in Orgasm topped with some Visiora pc104 face powder.

Brows:
filled in with Yaby brow powder in #3 and # 4 with brow shaper BC550 by Royal & Langnickel.

Eyeshadow:
Yaby es103 Golden Desert on the moving eyelid, topped with a touch of es192 Seashell for added highlights.
FACE Atelier eye pencil in black, smudged deep into the upper and lower lashline gives a smoldering look, and is set with Yaby eyeshadow es154 Abyss to make sure it lasts as long as the party does. The same eyeshadow is taken slightly up, into the outer corners of the eye to make the base of the crease definition.
Yaby eyeshadow es144 Twinkle Twinkle lightly applied into the lashline for a gently, but sexy sparkle that catches the light.
Crease definition is achieved by blending Yaby es168 Bark, es253 Milk Chocolate and es562 Royal Brown to bring out the blue in Eva’s eyes, together with es154 Abyss for depth.

Lashes:
Lots of FACE Atelier Mascara in Midnight Black on both the top and bottom lashes.
I usually do layers of mascara in between working on different parts of a face, allowing the lashes to dry completely, so I can curl them several times in between also.
The icing on the cake: a pair of half lashes by Cara K and a final coat of mascara to blend natural and false lashes seamlessly.

Lips:
Outlined and completely filled in with FACE Atelier’s lip pencil in Spice for staying power, topped off with a generous coating of non-sticky FACE Atelier Lip Glaze in Peach,
Eva’s favorite, along with Primrose.